Manualshelf

User's Manual

ManualsBrandsLAUNCH ManualsAutomotiveHeavy duty / Medium duty / Light duty Vehicle Communication Interface
31323334353637383940
LAUNCH
S3001 User Manual
24
Fig. 4-13
*Notes:
a). For commercial vehicles, refer to the above connection method to proceed.
b
). For passenger vehicles, replace the “Non-16pin connector” with “OBD I adaptor” +
“non-16pin connector (for passenger vehicles)”. Other connections shall also apply.
4.5 Communication Setup
There are two kinds of ways available for the tablet to communicate with the
S3001 VCI device: Wi-Fi and USB cable.
The USB cable connection is a simple & quick way to establish communication
between the tablet and the VCI module. After properly connecting the USB cable
from the tablet to the VCI, the VCI navigation button at the bottom of the screen
becomes highlighted indicating the USB connection is successful.
*Note: The USB connection provides the most stable and fastest communication.
When all communication methods are applied at the same time, the S3001
system will use the USB communication as the default priority.