User's Manual

LAUNCH

S3001 User Manual

128

ig. 15-3

Step 1: Connect the printer:

ap “Scan” to start scanning and select the desired printer hotspot named

with X-431PRINTER-XXXX (XXXX stands for 4 characters), and then tap

“Connect” to enter Step 2.

Step 2: Join the Wi-Fi printer into LAN:

ap “Scan” to select the desired local Wi-Fi network from the list, and type in

the security password (If it is an open network, password is not required), and

then tap “Confirm”.

. O

nce the Wi-Fi network of the printer is connected and the printer is found

tap “Printing test” to test the printing.

Now you can use the Wi-Fi printer to print!

If the printer is not found, please reset the printer to default factory settings (refer

to Step 2 for details) and check whether the current device and the printer are on

the same LAN.

B. If you have configured the Wi-Fi printer to the LAN:

2. Ta

p “Connect to Printer”:

a). If the local network remains as it is, tap “Test Print” directly to test the

printing.

b). If the local network changes, you have to reset the Wi-Fi printer.