User's Manual

LAUNCH
S3001 User Manual
102
Source Select which channel as trigger signal.
Condition To select pulse condition.
P
ulse Width Set required pulse width.
H
igh Freq
Rejection
Reject high frequency signals when selected.
1
2.4.2 Auto
The Scopebox has an Auto feature that sets up the Scopebox automatically to
display the input signal in a best fit.
Tap
,
the Scopebox may change the current settings to display the signal. It
automatically adjusts the vertical and horizontal scaling, as well as the trigger
coupling, position, slope, level and mode settings.
12.4.3 View Settings
<1> Calibration
This option adjusts the Scopebox’s internal circuitry to get the best accuracy.
Use this function to calibrate the Scopebox’s vertical and horizontal systems.
Tap
a
nd then tap [Calibration], a dialog box similar to Fig. 12-11 will appear.
F
ig. 12-11
Check the box before the channel to select it. To deselect it, just uncheck it. After
choosing the desired channel(s), tap [Start] to start calibration and [Start] button