User's Manual

LAUNCH
S3001 User Manual
97
8
Vertical Settings Panel: Controls the amplitude of the displayed
signal. User can change the volt/div, coupling and probe
attenuation of the CH1/CH2/CH3/CH4.
9
T
rigger Settings Panel: Controls the start event of the sweep.
1
0
Channel Selection Button
1
1
Function Menu
[Auto]: It indicates auto trigger setting.
[R
ef]: There are expert reference and base reference
available. Expert reference enables you to recall your customized
expert database, whereas base reference provides automatic
pre-setting function of specialized sensors.
[F
ile]: Provides save snapshot, snapshot manager, waveform
record and waveform replay.
[V
iew]: Calibration and display settings are available.
[Me
asure]: Includes signal source measurement, horizontal
measurement, vertical measurement and clear measurement.
[S
ettings]: Shows/hides the parameter settings area including
horizontal settings, vertical settings and trigger settings.
/ [S
tart/Stop]: Starts/stops collecting waveforms.
12.4 O
perations
1
2.4.1 Channel selection and attributes setting
<1> Channel selection
There are two ways available for channel selection:
A. Select from the channel tab shown at the bottom of the waveform display area
B. Select from Vertical settings
*Note: For better comparison and identification, each channel and waveform are
marked in different colors.