User's Manual

Safety & Accessory
Initial UseDiagnosticsFAQ & Care
Product Prole
43
www.x431.com [phone]
LAUNCH
PAD VII User Manual

Note: During the SmartLink diagnosis, especially during remote online programming, it is recommended that
the vehicle baery is connected to a charging power source. Doing so can prevent the vehicle from running out
of power and failing to start due to long diagnosis me.

end into the LAN port of network modem.
Note: The network broadband of 100MB and above is required for this operaon.
4. After a successful network connection, the SmartLink C screen displays prompt information asking
whether to enter the super remote diagnostic mode. Tap Yes, the system will automatically read the
vehicle information and connect to the remote diagnosis server.
Note: One SmartLink C can only accept one remote diagnosc operaon at one me.
5. Turn on the vehicle ignition.
Note: Aer receiving the order, the SmartLink B master technician will accept the order and contact you via
phone or E-mail address.

message will be displayed on the SmartLink C screen.