User's Manual
Table Of Contents
- User Manual
- 1 Introduction
- 2 Components & Controls
- 3 Preparations
- 4 Initial Use
- 5 Start Diagnostics
- 6 Maintenance Reset
- 6.1 Oil Reset Service
- 6.2 Electronic Parking Brake Reset
- 6.3 Steering Angle Calibration
- 6.4 ABS Bleeding
- 6.5 Tire Pressure Monitor System Reset
- 6.6 Gear Learning
- 6.7 IMMO Service
- 6.8 Injector Coding
- 6.9 Battery Maintenance System Reset
- 6.10 Diesel Particulate Filter (DPF) Regeneration
- 6.11 Electronic Throttle Position Reset
- 6.12 Gearbox Matching
- 6.13 AFS (Adaptive Front-lighting System) Reset
- 6.14 Sunroof Initialization
- 6.15 Suspension Calibration
- 6.16 EGR Adaption
- 6.17 Seats Calibration
- 6.18 Tyre Reset
- 6.19 Coolant Bleed
- 6.20 AdBlue Reset (Diesel Engine Exhaust Gas Filter)
- 6.21 NOx Sensor Reset
- 7 Software Update
- 8 SmartLink Diag.
- 9 TPMS
- 10 ADAS
- 11 User Info
- 12 Others
- 13 J2534 Reprogramming Using SmartLink C
- 14 FAQ
- 15 Glossary of Terms & Abbreviations
- 页面提取自－User Manual
Safety & Accessory
Initial UseDiagnosticsFAQ & Care
Product Prole
29
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
: Tap it to view the waveform graph of the current data stream item.
Note: The waveform can be zoomed in or out via: Spread apart/pinch together.
To zoom in manually, place two ngers on the screen and then spread them apart. To zoom out, place two ngers
apart on the screen and then pinch them together.
the system will alarm.
Note: The real time (Live Data) vehicle operating information (values/status) that the on-board computer
supplies to the tool for each sensor, actuator, switch, etc. is called Parameter Idencaon Data (PID).
Graph: Tap to view the waveforms of the selected data stream items.
Combine: This option is mostly used in graph merge status for data comparison. Select (Maximum 4
waveforms corresponding to these items immediately.