User's Manual
Table Of Contents
- User Manual
- 1 Introduction
- 2 Components & Controls
- 3 Preparations
- 4 Initial Use
- 5 Start Diagnostics
- 6 Maintenance Reset
- 6.1 Oil Reset Service
- 6.2 Electronic Parking Brake Reset
- 6.3 Steering Angle Calibration
- 6.4 ABS Bleeding
- 6.5 Tire Pressure Monitor System Reset
- 6.6 Gear Learning
- 6.7 IMMO Service
- 6.8 Injector Coding
- 6.9 Battery Maintenance System Reset
- 6.10 Diesel Particulate Filter (DPF) Regeneration
- 6.11 Electronic Throttle Position Reset
- 6.12 Gearbox Matching
- 6.13 AFS (Adaptive Front-lighting System) Reset
- 6.14 Sunroof Initialization
- 6.15 Suspension Calibration
- 6.16 EGR Adaption
- 6.17 Seats Calibration
- 6.18 Tyre Reset
- 6.19 Coolant Bleed
- 6.20 AdBlue Reset (Diesel Engine Exhaust Gas Filter)
- 6.21 NOx Sensor Reset
- 7 Software Update
- 8 SmartLink Diag.
- 9 TPMS
- 10 ADAS
- 11 User Info
- 12 Others
- 13 J2534 Reprogramming Using SmartLink C
- 14 FAQ
- 15 Glossary of Terms & Abbreviations
- 页面提取自－User Manual
Safety & Accessory
Initial UseDiagnosticsFAQ & Care
Product Prole
19
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
.
.
to choose it from the record list.
to enter it manually.
Tap
to switch the camera to barcode pattern recognition mode.
After scanning, the screen automatically displays the result.
OK
remote server, the system will enter the vehicle information screen.
REPEAT.
OK, the system will automatically identify the vehicle model and directly navigate
to the vehicle information page.
Note: In general, vehicle idencaon numbers are standardized - all contain 17 characters. VIN characters may
be capital leers A through Z and numbers 1 through 0; however, the leers I, O and Q are never used in order to
avoid mistakes of misreading. No signs or spaces are allowed in the VIN.