Manualshelf

User Manual

ManualsBrandsLAUNCH ManualsAutomotiveX431 PAD V Automotive Scan Tool, All-in-One Diagnostics & Services,All System Diagnostics Tool,J2534 ECU Programming, Bi-Directional Control, 50+ Services + SmartLink Box
31323334353637383940
LAUNCH X-431 PAD V User Manual
31
Place the VIN inside the viewfinder rectangle to scan it.
After scanning, the following screen will appear.
If the VIN scanned is incorrect, tap the result field to modify it and then tap
OK
.
If the VIN exists on the remote server, the system will navigate to the
diagnostic function selection screen directly.
Tap the desired option to perform the corresponding diagnostic function.
*Note: Before using this function, the corresponding diagnostic software and Auto
search file need to be downloaded on your tool first while downloading the
diagnostic software.
B. INPUT VIN: In this mode, you can input the vehicle VIN manually. In general,
the vehicle identification numbers are standardized - all contain 17
characters. VIN characters may be capital letters A through Z and numbers 1
through 0; however, the letters I, O and Q are never used in order to avoid
mistakes of misreading. No signs or spaces are allowed in the VIN.
Tap
Enter VIN
, the following screen will appear.