User Manual

36
LAUNCH Creader VII+ & Creader VIII User's Manual
3. In Figure 2, type in the Product Serial Number, which is located at the back of
the tool)
4. After the Serial Number is entered, click Update to jump to the registration
page. Enter the following information. Click Submit (refer to Figure 3).
Figure 3
(If you need the Register Code, proceed to the steps 5-8)
(If you have the Register Code, proceed to step 9 directly)
5. The Register Code can be found in your Creader VII+ / Creader VIII.
Connect one end of the supplied USB cord to the Creader VII+ / Creader VIII,
and the other end on the computer.
6. When the tool has powered up and entered the main menu screen, place
cursor on the Help icon (See Figure 4) and press the
button.
Figure 4
7. Select Tool Information (refer to Figure 5), press
button to enter.