Operating and Maintenance Instructions

LAUNCH FAQ
49
4. Tap “Clear all data” to start resetting until the tool automatically reboots.
5. How to activate the VCI?
*Note: Before registration, please make sure the network is properly connected.
If you have activated a VCI device before, but bought a new VCI one due to the
loss or other reasons, please follow the below steps to activate:
1. Tap the application icon on the home screen to launch it.
2. Tap "Personal Center" -> "Activate Connector".
3. Input product S/N and activation code, which can be found from the included
password envelope, then tap "Activate".
4. After activation is complete, go to "Personal Center" -> "My Connector" to
check if the activated VCI is displayed in the list or not. Multiple VCIs can be
bound to one tool. If you intend to use one of the VCIs to diagnose or test a
vehicle, just switch to the corresponding one.