User's Manual
Table Of Contents
- 1 Overview
- 1.1 Vehicle Coverage
- 2 Product Descriptions
- 3 Initial Use
- 4 Diagnose
- 5 Reset
- 5.1 Oil Reset Service
- 5.2 Electronic Parking Brake Reset
- 5.3 Steering Angle Calibration
- 5.4 ABS Bleeding
- 5.5 Gear Learning
- 5.6 IMMO Service
- 5.7 Injector Coding
- 5.8 Battery Maintenance System Reset
- 5.9 Diesel Particulate Filter (DPF) Regeneration
- 5.10 Electronic Throttle Position Reset
- 5.11 Gearbox Matching
- 5.12 AFS (Adaptive Front-lighting System) Reset
- 5.13 Sunroof Initialization
- 5.14 Suspension Calibration
- 5.15 EGR Adaption
- 5.16 Seats Calibration
- 5.17 Tyre Reset
- 5.18 Coolant Bleed
- 5.19 AdBlue Reset (Diesel Engine Exhaust Gas Filter)
- 5.20 NOx Sensor Reset
- 5.21 AC System Initialization
- 5.22 High Voltage Battery Detection
- 5.23 Windows Calibration
- 5.24 Language Change
- 5.25 A/F Reset
- 5.26 Transport Mode
- 5.27 Stop/Start Reset
- 5.28 Intelligent Cruise Control System Reset
- 5.29 Engine Power Balance Monitoring
- 5.30 Gas Particulate Filter (GPF) Regeneration
- 5.31 Motor Angle Calibration
- 6 Data
- 7 Upgrade
- 8 Add-on Modules
- Warranty
51
LAUNCH Professional 919X User Manual
CAUTION: When performing in-car inspection, ALWAYS have a second
person help you since this inspection requires driving the vehicle and operating the
scanner at the same time.
8.1.1 Connection
Clamp the BLACK and RED clips of the battery clamps cable on the Negative
(-) and Positive (+) terminals of the vehicle battery respectively.
8.1.2 Battery Health Test
It is used to analyze the health status of the automobile battery, calculate the
actual cold starting ability of the battery, judge the aging degree of the battery,
and provide reliable analysis basis for the test and maintenance of the battery.
1. After connection is properly done, go to [BTS] and select [Battery Health
Test].
2. The system will automatically connect the Bluetooth BST360 battery tester
(sold separately).
3. Select the correct battery type: After connection is successful, the system