User's Manual
Table Of Contents
- 1 Overview
- 1.1 Vehicle Coverage
- 2 Product Descriptions
- 3 Initial Use
- 4 Diagnose
- 5 Reset
- 5.1 Oil Reset Service
- 5.2 Electronic Parking Brake Reset
- 5.3 Steering Angle Calibration
- 5.4 ABS Bleeding
- 5.5 Gear Learning
- 5.6 IMMO Service
- 5.7 Injector Coding
- 5.8 Battery Maintenance System Reset
- 5.9 Diesel Particulate Filter (DPF) Regeneration
- 5.10 Electronic Throttle Position Reset
- 5.11 Gearbox Matching
- 5.12 AFS (Adaptive Front-lighting System) Reset
- 5.13 Sunroof Initialization
- 5.14 Suspension Calibration
- 5.15 EGR Adaption
- 5.16 Seats Calibration
- 5.17 Tyre Reset
- 5.18 Coolant Bleed
- 5.19 AdBlue Reset (Diesel Engine Exhaust Gas Filter)
- 5.20 NOx Sensor Reset
- 5.21 AC System Initialization
- 5.22 High Voltage Battery Detection
- 5.23 Windows Calibration
- 5.24 Language Change
- 5.25 A/F Reset
- 5.26 Transport Mode
- 5.27 Stop/Start Reset
- 5.28 Intelligent Cruise Control System Reset
- 5.29 Engine Power Balance Monitoring
- 5.30 Gas Particulate Filter (GPF) Regeneration
- 5.31 Motor Angle Calibration
- 6 Data
- 7 Upgrade
- 8 Add-on Modules
- Warranty
50
LAUNCH Professional 919X User Manual
8 Add-on Modules
There are two add-on modules available for extending the functions of the
tool.
Each module consists of two parts: hardware and app. These modules cannot
work properly on the tool, which need to work with the specific compatible
hardware (sold separately).
8.1 BST
Battery test is specically designed to help car owner, repair workshop, battery
factory determine whether the battery is normal or not. It supports various
battery standards and specications, including CCA, DIN, IEC, EN, JIS, SAE
and GB etc.
Two test modes (Out-of-car Inspection & In-car Inspection) are available for
battery test.
Out-of-car inspection indicates that the battery is disconnected from all
loading devices on vehicles. Only the Battery Health Test is supported for this
inspection.
Battery
BST360
BT
In-car inspection indicates that the battery connects to loading devices, such
as engine, etc. In this mode, the following tests can be done in a sequence of
Battery Health Test, Start System Test and Charging Health Test.
BST360
Vehicl e Battery
BT