User Guide
26
LAUNCH Creader Professional CRP123 User's Manual
Choose [Unit of Measure] and press [ ] to conrm, the screen will enter the
unit setting interface. Use the [
]/[ ] button to choose the desired one
and press [
] to save your change.
Figure 6-3
6.3 Time and date
This item is used to set the system date and time.
Choose [Time And Date] and press [
] to enter the setting interface, as
indicated on Fig. 6-4. Follow the on-screen instructions to nish your setting.
Figure 6-4
6.4 Beeper
It is used to set On/Off of the buzzer.