User's Manual

LAUNCH X-431Tool User’s Manual
21
21
Fig 3-26
Note: Refer to appendix
Ⅳ for the basic
setting channel of Volkswagen.
Button descriptions:
♦ [OK]: to make sure the inputted channel.
♦ [CANCEL]: to return the function menu.
♦ [BACK SPACE]: to delete the wrong
input number
After the correct channel No. is inputted, click
[OK] button. X-431TOOL prompts user to input
the matched data. See Fig 3-27
Fig 3-27
After the matched data are inputted, click [OK]
button to perform the function of “adaptation”.
(See Fig 3-28)
Fig 3-28
Click [OK]. If the adaptation is successful, the
screen will be displayed as shown in Fig 3-29
Fig 3-29
Read Individual Measuring Value
Click [Read Individual Measuring Value] from
the function menu. The screen will be
displayed as shown in Fig 3-30. Click the
number button to input the group No.