User's Manual

LAUNCH X-431Tool User’s Manual
20
20
Erase Fault Memory
Click [Erase Fault Memory] on the function
menu. X-431TOOL starts to erase the fault
code. (See Fig 3-23).
Fig 3-23
Button descriptions:
♦ [YES]: to execute read and erase the
fault code.
♦ [NO]: to return the function menu.
If all fault codes are erased or there is no fault
code in the tested system, the screen will be
displayed as shown in Fig 3-24
Fig 3-24
Button descriptions:
♦ [OK]: to return the function menu.
♦ [PRINT]: to print the test result.
Basic Setting
Basic setting is necessary for some systems
after service is done.
Click [Basic Setting] on the function menu.
Click the number button to input the group No.
(See Fig 3-25)
Fig 3-25
Button descriptions:
♦ [OK]: to execute the basic setting
function.
♦ [CANCEL]: to return the function menu.
♦ [BACK SPACE]: to delete the wrong
input number.
Adaptation
Click [Adaptation] the function menu. Click the
number button to input the group No. The
screen will be displayed as shown in Fig 3-26.