User's Manual

LAUNCH X-431Tool User’s Manual
7
7
10
Cigarette lighter
cable
Get power from the vehicle cigarette lighter
11
Battery cable
w/two clips
Get power from the vehicle battery
12 Power adapter Convert 100-240V AC power into 12V DC power.
13 Main cable Connect the diagnostic connector and DIAGBOX
14
X-431TOOL box
cable
Connect DIAGBOX and main unit for wire diagnosis.
Printer Operation
Fig. 2-5 shows the back view of the X-431TOOL (Open the housing of X-431 Tool main unit, and get
out the main unit.).
Fig. 2-5
Mounting Paper
Miniprinter uses thermal paper with size of Φ30×57mm (internal holeΦ7mm). Refer to Fig. 2-5 for
mounting the paper.