User Manual

LAUNCH  English User Manual

6 Reset

The Reset section is specially designed to provide you quick access to the

vehicle systems for various scheduled service and maintenance performances.

All resetting operations are driven by executive commands. Just by following the

on-screen prompts to select appropriate execution options, input correct values

or data, and perform necessary actions, the system will guide you through the

complete performance.

The most commonly performed service functions contain:

y Oil Reset Service

y Steering Angle Calibration

y Electronic Parking Brake Reset

y Battery Register / Battery Maintenance

y ABS Bleeding

y Electronic Throttle Position Reset / Learn

y Diesel Particulate Filter (DPF) Regeneration

y Tire Pressure Monitor System Reset

Oil Reset Service

This function can be performed in the following cases:

1. If the service lamp is on, you must provide service for the car. After service,

you need to reset the driving mileage or driving time so that the service lamp

turns off and the system enables the new service cycle.

2. After changing engine oil or electric appliances that monitor oil life, you need

to reset the service lamp.

Steering Angle Calibration

1. To reset the steering angle, first find the relative zero point position for the car

to drive in straight line. Taking this position as reference, the ECU can

calculate the accurate angle for left and right steering.

2. After replacing the steering angle position sensor, replacing steering

mechanical parts (such as steering gearbox, steering column, end tie rod,

steering knuckle), performing four-wheel alignment, or recovering car body,

you must reset the steering angle.

Electronic Parking Brake Reset