User Manual

LAUNCH  English User Manual
10
3 Wi-Fi Setting
Note: If you don’t need to use Wi-Fi for a while, you can turn it off to conserve
battery life.
XV1M has built-in Wi-Fi that can be used to get online. Once you’re
online, you can register your V1M, surf the Internet, get apps, send
email, launch the remote diagnosis, and check for software updates etc.
3.1 Connect to a Wi-Fi network
1. On the home screen, tap
Settings -> WLAN
.
2. Slide the Wi-Fi switch to ON, V1M will start searching for
available wireless networks.
3. Select a wireless network,
y
If the chosen network is open, V1M will connect
automatically;
y
If the selected network is encrypted, a network password will need to be
entered.
4. When “Connected” appears, it indicates the Wi-Fi connection is complete.
Note: When Wi-Fi is not required, this should be disabled to conserve battery
power.
Once it is connected successfully, tap the Wi-Fi network from the list to view its
name, link speed, security type, IP address etc.
When this tool is in range, it will connect to the previously linked network
automatically.
3.2 Disconnect from a Wi-Fi network
1. On the home screen, tap
Settings -> WLAN
.
2. Tap the network with a
Connected
status, then tap “Disconnect”.