User's Manual

LAUNCH X-431 PAD III User Manual
27
Fig. 4-13
*Notes:
a).Forcommercialvehicles,refertotheaboveconnectionmethodtoproceed.
b).Forpassengervehicles,replacethe“Non‐16pinconnector”with“OBDIadaptor”+
“non‐16pinconnector(forpassengervehicles)”.Otherconnectionsshallalsoapply.
4.5 Communication Setup (Only for Passenger Vehicle Version)
4.5.1 Pairing up via Bluetooth
There are two kinds of ways available for the tablet III to pair with the DS401
connector.
1. Connect one end of the USB cable (optional) to the Mini USB port of the
DS401 connector.
2. Connect the other end to the USB port of the PC. The power indicator of the
DS401 connector lights up.
3. Enter Bluetooth setting screen by tapping “Tablet Settings” -> “Bluetooth”,
slide the Bluetooth switch to ON and the tablet starts searching for all
available Bluetooth device.