User's Manual

42
LAUNCH
X-431 PADII User's Manual
7. The data and time of X-431 PADII can not be set.
It is because Automatic date & time is set on your X-431 PADII. Tap
Settings > Date & time, deselect “Automatic date & time” and then set
the date and time manually.
The exposure standard for wireless devices employs a unit of
measurement known as the Specific Absorption Rate(SAR). The SAR
limit set by the FCC is 1.6 W/kg.The highest SAR level measured for
this device is less than SAR limit, so this device meets the FCC
Requirement.