User's Manual

LAUNCH
X-431 PADII User's Manual
41
Appendix - FAQ
1. Whether can I use other similar adaptors to charge X-431
PADII?.
No. Please use the included 5V power adaptor or docking station to
charge your X-431 PADII. We assume no responsibility for damage
or loss resulting from using other similar adaptors other than the
specied one.
2. How to save power?
Please turn off the screen while X-431 PADII keeps idle.•
Set a shorter standby time.•
Decrease the brightness of the screen.•
If Wi-Fi connection is not required, please turn it off.•
Disable GPS function if GPS service is not in use.•
3. What should I do in case I forgot the screen lock?
You can set screen lock as pattern or password. If you forgot the
password, please consult your device provider or reset your device.
In light that you often use X-431 PADII to diagnose vehicles and it may
take you several minutes to do resetting, you are not recommended to
dene screen lock.
For detailed information on how to restore X-431 PADII to factory
settings, please refer to Item 4 “How to reset X-431 PADII tablet?”
described as below.
4. How to reset X-431 PADII tablet?
Do the followings to reset X-431 PADII:
Ensure X-431 PADII is in OFF mode;1.
Hold and press VOLUME - key and POWER key until X-431 PADII 2.
enters system recovery mode;
Use the VOLUME + / VOLUME - key to move the highlight bar on 3.
“wipe data / factory reset” and press POWER key to conrm;
Press VOLUME + / VOLUME - to select “4. yes” and press POWER
key to conrm;
Select “5. reboot system now” and press POWER key to restart the
system;
After resetting is complete, follow the on-screen instructions to 6.
nish the system settings.
Warning: Resetting may cause data loss. Before doing so, please
make sure important data has been backed up.
5. How to do if the system runs slowly?
In this case, please do the followings:
> Check all running applications (“Settings” > “Apps” > Swipe the
screen from right to left until “RUNNING” tab appears) and stop
the unused applications (Tap the desired application, and then tap
“Stop”).
> Check all installed applications and remove the unnecessary
applications.
If all steps mentioned above are nished and the system still works
slowly. Please try to close the system and reboot your X-431 PADII.
6. Why some videos on the website can be not played?
It possibly results from:
The current browser does not support Flash playing; 1.
Flash player does not support this video. 2.
Try to use other browsers to watch it or install other Flash player.