User's Manual

20
LAUNCH
X-431 PADII User's Manual
Fig. 5-19
On data stream reading page, the following operations can be done:
Select All: Tap it to select all data stream items.
Graphic: After selecting, tap it to view the waveform.
Record: Tap to start recording diagnostic data for future playback and
view. The saved file follows the naming rule: It begins with vehicle
type, and then the record starting time and ends with .x431 (To
differentiate between les, please congure the accurate system time).
The file is stored in “My Report” under
menu. For details on
playback operations, please refer to Chapter 5.7.1 “My Report”.
To stop reading the data stream, tap “Stop”.
Reports: To save the current data in text format.
Tap
to return to the function selection screen.
5.6.4 Special Function
This option allows you to detect whether the system parameters are
normal or not. It mainly includes: Injector test, fuel pump test, purge
control solenoid and so on.
Take “1# injector” as an example.
To detect whether 1# injector works normally or not, tap “1# injector”,
the system will automatically carry out the function. After complete, a
prompt dialog box will pop up on the screen.
5.7 Prole
This function allows users to manage your personal information.
5.7.1 My Report
This option is used to view the diagnostic report generated in process
of vehicle diagnosis. Additionally, delete, send operations are also
supported.
Tap “My Report”, a list of diagnostic report will appear below the tab.
If user records the running parameters while reading data stream, it
will be saved as .x431 le and appear under Diagnose Playback tab.
In case the DTC result is saved as .jpg or .txt file on Read Trouble
Code page, .jpg les and .txt les will be displayed under Reports tab.
Tap certain diagnostic report (.txt) to view it.
On-Screen button denitions:
Rename: To rename the current report;
Delete: To delete the current report.
Tap certain diagnosis playback le (.x431) to view it.
On-Screen button denitions:
Delete: To delete the current report;
Value: To view the diagnostic report in value form.
Graphic: To view the diagnostic report in waveform form.