User's Manual

LAUNCH
X-431 PADII User's Manual
15
Fig. 5-5
1. If you are a new user, tap “Register” to enter registration page. See
Fig. 5-6.
Fig. 5-6
In Fig. 5-6, fill in the information in each field. After inputting, tap
“Register and Log In”, a prompt message similar to the following will
appear:
Fig. 5-7
In Fig. 5-7, tap “Activate” if you want to experience vehicle diagnostic
software. See Fig. 5-8.
Fig. 5-8
To exit and register it later, tap “No connector”.
Input the Serial Number and Verication Code, and then tap “Conrm”.
Note: The Serial Number and Verication Code can be obtained
from the password envelope. See Fig. 5-9.
Product S/N
Verication Code
Fig. 5-9