User's Manual

18
MAXGo User's Manual
Fig. 5-19
To select certain data stream item, just tap
, then the selected item
will be activated and will change into .
To select all items of the current screen, tap “Select Page”, and then
tap “Confi rm” to enter data stream reading interface. See Fig. 5-20.
To deselect all items, tap “unselect”.
Fig. 5-20
After selecting, tap “Graphic”, the system will display data changes in
waveform.
To start to record, tap “Record”; To stop reading, click “Stop”.
On data stream reading page, the following operations can be done:
Graphic: Tap to select the desired datastream to be browsed, and
then tap it to view the waveform.
Record: Tap to start recording diagnostic data for future playback and
view. The saved file follows the naming rule: It begins with vehicle
type, and then the record starting time and ends with .x431 (To
differentiate between fi les, please confi gure the accurate system time).
The file is stored in “My Report” under
menu. For details on
playback operations, please refer to Chapter 5.7.1 “My Report”.
Reports: To save the current data in text format.
Tap
to return to the function selection screen.
5.6.4 Special Function
This option allows you to detect whether the system parameters are
normal or not. It mainly includes: Injector test, fuel pump test, purge
control solenoid and so on.
Take “1# injector” as an example.
To detect whether 1# injector works normally or not, click “1# injector”,
the system will automatically carry out the function. After complete, a
prompt dialog box will pop up on the screen.
5.7 Profi le
This function allows users to manage your profi le.
5.7.1 My Report
This option is used to view the diagnostic report generated in process
of vehicle diagnosis. Additionally, delete, send operations are also
supported.