User's Manual

6
MAXGo User's Manual
3 Preparations
3.1 Charging MAXGo
Remove the USB port cover from top of MAXGo display tablet, and 1.
then connect one end of the included battery charger into it;
Connect the other end of the charger into AC outlet. If MAXGo is 2.
being charged, the charging indicator illuminates red; Once the
indicator turns green, it means that the charging is complete.
3.2 On Using Your Battery
If the battery keeps unused for a long time or battery is completely •
discharged, it is normal in case it can not be turned on while being
charged. Please charge it for a period and then turn it on.
Please use the included charger to charge your MAXGo. We •
assume no responsibility for damage or loss resulting from using
other similar chargers other than the specifi ed one.
To prolong the service life of the battery, avoid charging too •
frequently.
The charging time of battery varies with temperature condition and •
battery consumption status.
While MAXGo has low battery, a beep will sound. If it is very low, •
MAXGo will be switched off automatically.
3.3 Power On / Power Off MAXGo
3.3.1 Power on
Press the POWER key to turn on MAXGo.
Note: If it is the fi rst time you use MAXGo or MAXGo keeps idle
for a long time, MAXGo could fail to be turned on. It results from low
battery. In this case, please recharge your MAXGo for a while and try
to turn it on.
3.3.2 Power off
Press the POWER key, an option menu will pop up on the screen.1.
Tap “Power off” to turn off MAXGo.2.
3.4 Tips On Finger Operations
Actions Results
Single-tap To select an item or launch a program.
Double-tap
To zoom in so that the text on a webpage appears
in a column that fi ts your device’s screen.
Long press
Press and hold on the current interface or area
until a contextual menu pops up on the screen,
and then release it.
Slide To jump to different pages.
Drag Tap the desktop icon and drop it to other location.
Spread apart /
Pinch together
To zoom in manually, place two fingers on the
screen and then spread them apart. To zoom out,
place two fingers apart on the screen and then
pinch them together.
3.5 Lock & unlock the screen
Many screen lock modes are available on MAXGo. Take the preset
screen-lock mode as example for demonstration.
3.5.1 Lock the screen
When MAXGo is ON, press POWER key once to lock the screen; •
The system will lock the screen automatically after MAXGo remains •
idle over the preset standby time.