User's Manual
LAUNCH CRP-HD
User's Manual
III
it unsupervised.
Please use the included battery and charger. Otherwise, explosion may •
happen.
Do not disconnect power abruptly when CRP-HD is being formatted or •
in process of uploading or downloading. Or else it may result in program
error.
Precautions on Operating Vehicle’s ECU
Do not disconnect battery or any wiring cables in the vehicle when the •
ignition switch is on, as could avoid damage to the sensors or the ECU.
Do not place any magnetic objects near the ECU. Cut off the power •
supply to the ECU system before performing any welding operations on
the vehicle.
Use caution when performing any operations near the ECU or sensors.•
Ground yourself when you disassemble PROM, otherwise ECU and
sensors can be damaged by static electricity.
When reconnecting the ECU harness connector, be sure it is attached •
rmly, otherwise electronic elements, such as ICs inside the ECU, can
be damaged.
Table of Contents
1 Introduction ...........................................................................................1
1.1 Product Prole .....................................................................................1
1.2 Features ..............................................................................................1
1.3 Technical Specications ......................................................................1
2 Knowledge of CRP-HD .........................................................................2
2.1 CRP-HD Display Tablet .......................................................................2
2.2 CRP-HD Accessory Checklist..............................................................3
3 Preparations..........................................................................................4
3.1 Charging CRP-HD ...............................................................................4
3.2 On Using Your Battery .........................................................................4
3.3 Power On / Power Off CRP-HD ..........................................................4
3.3.1 Power on ..................................................................................... 4
3.3.2 Power off ..................................................................................... 4
3.4 Tips On Finger Operations ..................................................................4
3.5 Lock & unlock the screen ....................................................................4
3.5.1 Lock the screen ........................................................................... 5
3.5.2 Unlock the screen ........................................................................ 5
3.6 Screen Layout .....................................................................................5
3.7 Status Bar ............................................................................................5