User Manual

5
10
INSIDE VIEW
12
• “Snap” the roof supports to the front end of
the assembly.
Hint: The roof supports are designed to fit
the assembly one way. If a roof support
does not seem to fit, turn it around or try
assembling a different roof support.
11
9
• Fit the slots in the underside of the counter to
the tabs on the top side of the assembly.
• Push near each tab to “snap” the counter
in place.
• Fit the wheel to the assembly.
• From inside the assembly, insert and tighten
six screws to attach the wheel.
Assembly
Wheel
Roof
Support
Roof
Support
Counter