User Manual

4
Assembly
1
•Fit the walls together.
IMPORTANT! Fit the smaller connector into the
larger connector. The connectors are designed
to fit one way. Do not force the connectors
together. If they do not seem to fit together,
check to be sure that the wires are not twisted
and try again.
Walls
3
• Insert four screws into the handle and tighten.
5
• Fit the door upper pin into the hinge on the
wall assembly.
4
•Insert two screws into the wall assembly
and tighten.
Handle
House Number
2
• Fit the house number and handle to the
wall assembly.
Door