User's Manual

November 2010
SiBEAM, Inc.
SB-UG-0004-B 11
Figure 5. WAC Network Screen
The Info screen of the WAC (Figure 6) is used to show what A/V formats are being transmitted and which
code versions are running on the module. The code versions will consist of embedded code run on the
embedded CPU of the SB9220 and the host code run on the Atmel host microcontroller.
Figure 6. WAC Info Screen
The Advanced screen of the WAC (Figure 7) is used to for code updates. When selected, additional pop-up
windows will ask for the location of the new code to update and then start the update process. The code
update time takes approximately 5-7 minutes.