Installation Manual

10. The Status tab will reflect something similar as shown below upon a successful
connection:
Select different mode to other display screen:
I. Power on TV/monitor (or other display products) and make sure WirelessHD receiver is
activating.
II. Open laptop WAC application
III. Wait for the laptop and WirelessHD receiver to be associated.
IV. Click “Connect” button on the WAC.
V. Wait until the connection is successful.
VI. Let cursor stay on Windows’ desktop and press right button on the mouse then
choosing “screen resolution”. It should detect 2 different displays on it.
VII. Select “Duplicate” to let receiver side show the same format on screen.
VIII. Wait 30 seconds* for the TV/monitor connection to be successful and stable.
Checkpoint: Same Windows desktop should appear on laptop internal display and the
TV/monitor.
IX. Select “Extend” to cascade the secondary display besides primary one
X. Wait 30 seconds* for the TV/monitor connection to be successful and stable.