Installation Manual

1. Turn on the TV, monitor, or projector and change the input to the HDMI port for which
the WirelessHD receiver adapter is connected.
2. Turn on the WirelessHD receiver adapter.
3. Turn on and boot up your laptop system.
4. Launch the WirelessHD Application Controller software from either the Desktop
shortcut icon:
or from the Start/All Programs/WiHD Controller menu.
5. When the WirelessHD Application Controller software launches, you will see the
following window:
6. Ensure that the WiHD transmitter is turned on. The left most of the top three buttons
will indicate "Turn WiHD OFF" (see screenshot above) when the transmitter is turned on
and enabled. If this button indicates "Turn WiHD ON", the transmitter is turned off
therefore press this button once and within a couple seconds the button will change its
status to "Turn WiHD OFF" and the WirelessHD transmitter will be turned on and