User Manual

This equipment is marked with the symbol.
This indicates compliance with the R&TTE Directive 1999/5/EC and meets the relevant parts of
following technical specifications:
EN 301 567 v1.1.1: Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit
WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the
R&TTE Directive.
EN 301 489-28 v1.1.1: Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electro Magnetic Compatibility (EMC) standard for radio equipment and services; Part 28:
Specific conditions for wireless digital video links.
EN 60950: Safety of Information Technology Equipment.
EN 62311: 2008: Assessment of electronic and electrical equipment related to human exposure
restrictions for electromagnetic fields (0 Hz - 300 GHz)
Marking by the symbol indicates that usage restrictions apply.
CE RF Radiation Exposure Statement:
8. Caution This equipment complies with European RF radiation exposure limits and is meant
to be used as an Indoor device. The installer of this radio equipment must follow the
following guidelines:
a. Module shall be placed inside the lid of the laptop (display portion of laptop) and
that the antenna (RF board) shall be pointed away from the end user.
b. Minimum distance from base plane of laptop to the bottom edge of RF chip shall be
greater than or equal to 3.3cm.
3.3 cm
SIL-SK63100
antenna
(RF board)
c. For minimum distance less than 3.9cm, the orientation of the RF chip shall be
restricted to place the A1 marker located at the top.
Following is a list of countries available for CE mark one-stop notification relating to this
equipment: