User's Manual

Module Installation Guide
9 ©2017 SiBEAM, Inc., a Lattice Semiconductor company.
All rights reserved. CONFIDENTIAL
Modular approval for Lattice MOD6212/13 transmitter
MOD6212/MOD6213 radio is a low power 60GHz full duplex radio operating under §15.255 that
provides very short range (<15mm) contactless bidirectional USB data transfer between two hosts.
Spatial separation between receive and transmit antennas is used to allow simultaneous operation of
two radio links on the same frequency to provide bidirectional data transfer.
Lattice is a module supplier and does not manufacture host systems.
Modular transmitter should meet all the applicable requirements.
1. The final host system shall be subject to unwanted radiated emission testing up to 40GHz with
transmitter active and a test report shall be provided to the grantee. The grantee shall review that
report and acknowledge to the host manufacturer that it demonstrates compliance.
2. Host manufacturer module placement shall comply with the following requirements:
a) The shielded side of the module shall face inwards to the host;
b) The open side of the module shall be immediately adjacent to the enclosure with no intermediate
conducting material;
c) The spacing between unshielded side of module and enclosure shall be 3mm or less and must be free
of any conducting material within a defined exclusion region (Figure 7).
d) The enclosure shall be constructed from non-conducting material adjacent to that exclusion region.