User's Manual

AFTER SALES SUPPORT
[e-mail]
GB
IRE
00800/52323000
Operation
GBIRE
41
Starting⁄stopping the workout
− Before starting your workout, wait until the GPS
watch is receiving a proper GPS signal and the GPS
icon
16
is no longer flashing (also see section
“Finding satellites”).
− Press the ST./STP key
9
to start or stop
the workout.
The workout icon
24
will illuminate.
It will go out when you stop your workout.
Taking lap times
− During your workout, press the LAP/RESET key
11
to
take a lap time.
The laps can also be timed automatically
(see section “AUTO LAP”).
A maximum of 99 lap times are saved
for each workout.
After your workout
Once you have completed your workout, transfer the
training data to the memory of the GPS watch:
− Press and hold the LAP/RESET key
11
until the
message “SAVED!” appears in the top row
15
.
As a result, you have reset all data for the workout to
zero and can start a new workout. The data for the
workout you completed will be stored in the memory of
the GPS watch. You can view them in the protocol later
(see section “History mode”) or transfer them to the
Crane Connect app on your smartphone/tablet
(see section “Data transfer”).
Korrektur
, press the LAP/RESET key
, press the LAP/RESET key
The laps can also be timed automatically The laps can also be timed automatically
(see section “AUTO LAP”). (see section “AUTO LAP”).
A maximum of 99 lap times are saved A maximum of 99 lap times are saved
for each workout.for each workout.
After your workoutAfter your workout
Once you have completed your workout, transfer the Once you have completed your workout, transfer the
training data to the memory of the GPS watch:
training data to the memory of the GPS watch:
− Press and hold the LAP/RESET− Press and hold the LAP/RESET
V1
It will go out when you stop your workout.It will go out when you stop your workout.
, press the LAP/RESET key
, press the LAP/RESET key