User's Manual

AFTER SALES SUPPORT
[e-mail]
GB
IRE
00800/52323000
IRE
Start-up
GB
20
Battery pack charging level
One battery pack charge is sufficient for max. 16 hours of
operation in workout mode with GPS and approx. one
year in watch mode.
The battery pack charging level is indicated with four
bars in the icon
20
on the display panel
13
.
−
If only one bar is visible, you should charge the
watch as soon as possible.
Chest strap
The elastic chest strap with the transmitter unit is for meas-
uring the heart rate. The transmitter unit records heart
beats via the gummed area of the chest strap and transmits
the pulses to the GPS watch via Bluetooth®. Therefore, you
must establish a Bluetooth® connection between the GPS
watch and the transmitter unit (“Pairing”) after putting on
the chest strap. By factory default, the watch is paired with
the chest strap. Normally, re-pairing is only required after
changing the batteries of the chest strap of after changing
the
chest strap.
The battery is already inserted in the chest strap upon
delivery; it is operational. The section “Changing the
battery of the transmitter unit” explains how to change
the transmitter unit’s battery.
The transmitter unit becomes active when you put the
chest strap on and switches off when you take the chest
strap or transmitter unit off.
Korrektur
with the transmitter unit is for meas
uring the heart rate. The transmitter unit records heart
uring the heart rate. The transmitter unit records heart
beats via the gummed area of the chest strbeats via the gummed area of the chest str
ap and transmits
ap and transmits
the pulses to the GPS watch via Bluetooth®. Therefore, you the pulses to the GPS watch via Bluetooth®. Therefore, you
must establish a Bluetooth® connection between the GPS must establish a Bluetooth® connection between the GPS
watch and the transmitter unit (“Pairing”) after putting on watch and the transmitter unit (“Pairing”) after putting on
the chest strap. By factory default, the watch is paired with the chest strap. By factory default, the watch is paired with
the chest strap. Normally, re-pairing is only required after the chest strap. Normally, re-pairing is only required after
changing the batteries of the chest strap of after changing changing the batteries of the chest strap of after changing
chest strap.
chest strap.
The battery is already inserted in the chest strap upon The battery is already inserted in the chest strap upon
V1
with the transmitter unit is for measwith the transmitter unit is for meas
uring the heart rate. The transmitter unit records heart