User's Manual

AFTER SALES SUPPORT
[e-mail]
GB
IRE
00800/52323000
Start-up
GBIRE
19
Incorrectly connecting the cable may cause
the watch or cable to heat up.
− Make sure that the USB cable is connected
so that the metal pins on the clip lock
directly into the contact points of the
watch.
3. Connect the USB cable with a USB charger or a USB
port on your computer carrying power. There is no
need to install a driver for charging the battery pack.
If the GPS watch has been switched off, it automatically
switches on when charging.
The icon of a charging battery appears on the display
panel
13
during the charging process.
If the battery pack is fully charged, the “FULL” indicator
will appear.
4. Pull the USB plug out of the USB charger or PC.
5. Carefully take the clip for the USB cable off of the GPS
watch.
Korrektur
If the GPS watch has been switched off, it automatically
switches on when charging.
The icon of a charging battery appears on the display
The icon of a charging battery appears on the display
during the charging process. during the charging process.
If the battery pack is fully charged, the “FULL” indicator If the battery pack is fully charged, the “FULL” indicator
Pull the USB plug out of the USB charger or PC.Pull the USB plug out of the USB charger or PC.
Carefully tCarefully t
ake the clip for the USB cable off of the GPS ake the clip for the USB cable off of the GPS
watch.watch.
V1
port on your computer carrying power. There is no port on your computer carrying power. There is no
need to install a driver for charging the battery pack.
need to install a driver for charging the battery pack.
If the GPS watch has been switched off, it automatically
If the GPS watch has been switched off, it automatically