User's Manual

How to create Waypoints or a path in the PC
Note: You should have GPS Master installed in the PC first. See the GPS
Master installation and user’s manual for details.
 Run GPS Master
 Activate the Path Manager ( Path-->Path Manager)
 Click NEW on the Current Path
 Locate the desired position in the embedded Google Maps (GMAP) and
left click the mouse button. A new waypoint is just created. It is assigned to
a default name. If you want to change this name, double click the waypoint
place mark. A dialogue box will appear. You can input a meaningful name
there. The name of waypoints is limited to 10 characters long.
 Add as many points as you want. Waypoints are linked sequentially.
 Click Save Path as you finish adding waypoints. They will be saved into
the Current Path table.
 Clip the watch and plug in the USB cable. Then Click the “PC->Watch”
button in GPS Master. Path(s) in the Current Path table will be transferred to
the watch in seconds.
How to Save waypoint while navigating
 Once GPS has been fixed, hold [L/R] to save the waypoint
 The waypoint will be saved to the current path
How to Start/Stop Workout session and Take Laps while navigating
 Press [S/S] to Start Workout. Push [S/S] again to Stop Workout
 Press [L/R] to take Lap
F. Navigation Function
05
F-
Navigation