User's Manual

F. Navigation Function
04
F-
Follow the heading pointer
Once GPS has been fixed, the heading pointer starts to
work. Make sure that the electronic compass has been
calibrated properly (See compass calibration details in the
System Setting chapter) and the watch is maintained at
horizontal position. Tilting away from the horizontal position
will affect the accuracy of the heading pointer. When
everything is properly set, the pointer always points to the
active waypoint.
Your current speed and distance to the active waypoint are
shown at the top right of Navigation screen. Time of Day,
Workout Time, Distance to Destination, Estimated Time to
Destination, and Current HR are scrolling out once at a time
at the bottom line. When there is no HR datum, it will not be
shown at all and this part will be skipped.
When you are approaching to the WP region of the active
waypoint within the preset radius, 3 beep tones will be
heard. The beep tones will be suppressed when the Key
Tone setting is turned OFF. If you are navigating with
Forward / Backward mode, it directs you to the next
waypoint automatically. This process repeats until you arrive
at the final destination.
Navigation
Heading pointer
Current
Speed
Waypoint
Destination
Workout
Data View