User's Manual

F. Navigation Function
02
F-
Backward mode
The first waypoint is the destination. Select this mode when you want to navigate along the path in reverse
order. For example: from the last waypoint to the first one along the current path. Pick the nearest waypoint
on the Goto screen before you start. If the active waypoint is reached, it will navigate you to the previous
waypoint along the path. This repeats until the destination (first waypoint) is reached.
Set Waypoint radius
You are regarded as arrival at the active waypoint when you fall into the region of the waypoint within the
radius set in the WP Radius setting. It can be adjusted in Menu > Navigation > WP Radius. The Default is 30
meters (100 ft). The range is 10m~200m.