User's Manual
Table Of Contents
- Page 1
- Page 2
- Page 3
- Page 4
- Page 5
- Page 6
- Page 7
- Page 8
- Page 9
- Page 10
- Page 11
- Page 12
- Page 13
- Page 14
- Page 15
- Page 16
- Page 17
- Page 18
- Page 19
- Page 20
- Page 21
- Page 22
- Page 23
- Page 24
- Page 25
- Page 26
- Page 27
- Page 28
- Page 29
- Page 30
- Page 31
- Page 32
- Page 33
- Page 34
- Page 35
- Page 36
- Page 37
- Page 38
- Page 39
- Page 40
- Page 41
- Page 42
- Page 43
- Page 44
- Page 45
- Page 46
- Page 47
- Page 48
D. Getting Start: Glossary
Lap-By-Distance (LBD)
Create a lap after the preset lap distance has reached
Lap-To-Waypoint (L2WP)
Create a waypoint at the end of a selected path whenever a lap is marked.
Cold Start
When GPS has been suspended for a long time, Satellite data collected earlier are not valid anymore. It takes about 30
seconds to collect sufficient satellite data to locate your position. This is known as cold start.
Hot Start
When GPS has been terminated for only a short period of time before re-starting, satellite data is still valid. It takes only a
few seconds to locate your position. This is known as Hot start.
GPS Master
GPS Master is a PC application software written to work with the Nav Master watch. Workout log and paths can be
downloaded / uploaded easily via the USB cable. GPS Master provides a much better means for workout analysis, path
creation and manipulation.
%EMHR
%EMHR = percentage of Heart Rate (HR) with respect to the Estimated Maximum Heart Rate.
Estimated maximum HR is calculated as 220 – your age
Target HR Zone (Target Zone)
The region of HR is what you would like to set your highest and lowest HR limits to be during exercise.
AGPS ( Optional function )
AGPS stands for Assisted GPS, is a method which shortens the time for "fixing"GPS satellites signal. Also, it aids the
watch to perform a faster GPS positioning calculation under a weak signal environment.
The watch AGPS function is always on.
AGPS does have expiry. The expiry can be checked by Menu > GPS > AGPS.
AGPS data will be sent to watch when connecting to GPS Master. The updating process will take around 30 seconds once
the watch is un-plugged. During this period, GPS function is not available. Once finished, the expire date will be updated.
D-02