User's Manual

C. Setting Up: Fasten the Chest Strap on one’s chest
C-02
Note:
!Wetting the contacts with water or saliva can increase the conductivity.
!Make sure that the contacts are
.
!
!Use the Chest Strap in a place within 3 meters from the Watch, otherwise the Watch
CANNOT receive the data from the Chest Strap.
made firm contact with the user's skin during
measurement
Clean the contacts occasionally by moist paper towel, and wipe it dry with dry paper
to remove grease.
1
4
2
3
Insert the connecter of the elastic band
into the hole at the end of the chest strap.
Center the Chest Strap against your chest
as high under your breasts as comfortable.
Adjust the Chest Strap with the elastic
band comfortably and allow for normal
breathing.
Twist the elastic band so that the whole
connecter is completely lodged into the
chest strap.
WARNING:
!DO NOT adjust the Chest Strap too tight, it may hinder the blood circulation and breathing.
!Avoid doing any awkward motion during measurement, it may create an inaccurate heart rate reading.
Lodge the free connector into the
other end of the Chest Strap as Step
1 and 2.