GPS Watch: Instruction Manual A91359 ART11-0438 Project no: TD00310 Prepared by: Richard & Dorris Copyright: Latitude Limited Date: 5 January 2012 130 mm 90 mm 130 mm saddle wire Remarks: Size：130 x 90 mm Type: Book type Language: English Paper: white wood free 100 gms Color: 1C+1C Black Pages: 48 pages Binding: Saddle wire Finishing: Nil folding line Back Cover White inside back cover White inside front cover Cover Prepared by: Date: Checked by: Date: Approved by: Date:
OWNER'S MANUAL
A-01 A. Introduction Satellite Signal Satellite Signal Satellite Signal Nav Master combines personal training and navigation functions into one compact wrist computer. It is among the world’s smallest of its kind and yet fully water resistance. It can withstand immersion in 30 meters of water. The GPS navigation function locates and tracks your position wherever you go. Nav Master is powered by a highly sensitive chip that tracks your position even at weak signal condition.
A-02 A. Introduction: Warnings and Cautions WARNING ! CAUTION Be sure that you fully understand the functions and limitations of this product before using it. This product can only locate positions in an outdoor environment or open area. The more open the area is, the more accurate and faster information it can collect to locate the position. The performance of this product, like most Global Positioning System equipment, depends on the satellites operated by the government of the United States.
A-03 A. Introduction: FCC Compliance Statement FCC Compliance Statement (For US) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.
A. Introduction: Care and Maintenance A-04 • The watch is carefully designed and produced. In order to CARE utilize the features, it is advisable to use the watch in conformity with the notes below: • Avoid exposing the watch to extreme conditions for an MAINTENANCE unreasonable time and avoid rough use or severe impact on the watch. • Clean the watch occasionally with a soft and moist cloth. • Brush the clip contacts at the bottom of the watch regularly.
B-01 B. Introduction Heavy duty mineral glass lens Heart Rate Monitor Digitally coded 2.4GHz wireless chest strap Compact size: 46 x 61 x 16 mm and Weight 60g only. Above/In/Below Zone timer Water resistance is up to 30 meters 4 target heart rate zones Dual-processor design optimizes the battery life. The Battery with a fully single charge keeps the watch running for a year without using GPS function.
B-02 B.
B.
B-04 B.
C-01 C. Setting Up: Replace Battery for the Chest Strap Close position maker Open position maker Old battery hatch CR 2032 New CR 2032 CR 2032 1 Turn the battery hatch anticlockwise until the arrow aligns with the open position marker (arrow). Then turn one step further slightly until the battery hatch pops up. 2 Put aside the battery hatch. Replace the old battery with a new CR2032 battery with the “+” side facing upward. IMPORTANT: Be sure that the battery sits beneath the metal battery hook.
C-02 C. Setting Up: Fasten the Chest Strap on one’s chest 1 2 Insert the connecter of the elastic band into the hole at the end of the chest strap. 3 Twist the elastic band so that the whole connecter is completely lodged into the chest strap. 4 Center the Chest Strap against your chest as high under your breasts as comfortable. Adjust the Chest Strap with the elastic band comfortably and allow for normal breathing. Lodge the free connector into the other end of the Chest Strap as Step 1 and 2.
C-03 C. Heart rate Monitor Function: Strap Pairing Strap Pairing Every Chest Strap (HRM) is assigned a unique ID when it was manufactured in the factory. The watch has to be paired up with it before use. This is to avoid interference with other users who are using the same equipment. Pairing has been done in the factory. Should you replace the HRM with a new one, you have to pair the new strap again. To do the pairing, Hold [M] to go to Menu --> HRM--> Pairing.
C-04 C. Charge the Battery The watch has a built-in rechargeable lithium polymer battery. Charge it for at least 3 hours when it is going to be used for the first time. When the battery is empty, the charging cycle will be completed in less than 2 hours. When the battery is not empty, the charging time will be shorter.The performance of the battery with a single charge depends upon its usage. If the GPS is not activated, it can run for approximately one year.
D. Getting Start: Glossary D-01 Waypoint Waypoints are a set of coordinates that identify points in a physical space. For the purpose of terrestrial navigation, these coordinates usually include longitude and latitude, and sometimes altitude. The Waypoint name is limited to 10 characters long. It can be named or renamed in the GPS Master. Renaming can be done easily by just kicking and dragging on the waypoint names. Path Path is a collection of waypoints.
D. Getting Start: Glossary D-02 Lap-By-Distance (LBD) Create a lap after the preset lap distance has reached Lap-To-Waypoint (L2WP) Create a waypoint at the end of a selected path whenever a lap is marked. AGPS ( Optional function ) AGPS stands for Assisted GPS, is a method which shortens the time for "fixing"GPS satellites signal. Also, it aids the watch to perform a faster GPS positioning calculation under a weak signal environment. The watch AGPS function is always on. AGPS does have expiry.
D. Getting Start: Buttons Functions Summary Buttons Names D-03 Major Functions Light Press to turn ON the EL back light for about 3 seconds Hold to enter Night Mode (Press once to exit) Mode Press to select among the functional displays Hold to enter the setting mode Hold to fast exit to function modes when you are several levels down the menu Press to exit setting or go back one level up the menu ST.
D-04 D.
E. Workout Mode E-01 The Workout mode records and displays your current performance. You can keep records of and review your performance while you are running or navigating in the wilderness. The workout mode shows speed, distance traveled, workout time from the start, heart rate and other useful data regarding your current workout. It keeps records of speed, heart rate and altitude for you to view on a PC graphically. The Workout mode can work with the Navigation mode simultaneously.
E. Workout Mode E-02 How to start the Workout Mode Press [M] in the Time mode to enter the Workout mode Press [S/S] to Start/Stop the Workout. GPS is turned on automatically at start when they have not been turned on manually. Workout mode Mark Laps Press [L/R] to take Laps. The maximum number of laps for a single workout session is 99. Reset Workout / Navigation When workout has been stopped, hold [L/R] until you see the RESET popup message to reset workout/navigation.
E. Workout Mode - GPS Fixing with GPS GPS Fixed Hold [V] Workout mode E-03 How to turn ON the GPS manually: If GPS receiver has been stopped for a long time, say more than 2 hours, it is recommended to start the GPS manually, especially when you want to have track logging done at the beginning of workout. It is because the GPS cold start time is long. Usually it takes approximate 30 seconds. During the cold start period, track information is not available.
E-04 E. Workout Mode - Workout Profile Line 1 Line 2 Line 3 How to select Workout Profile h Hold [M] under any mode to enter Menu > Workout > Profiles > Select; press [V] to confirm. h Press [S/S] or [L/R] to select the desirable profile and then Press [V] to confirm.
E. Workout Mode - Workout History E-05 How to review Workout History from the watch Hold [M] under any mode to enter Menu > Workout > History ; press [ V ] to confirm . The summary of the latest record will be shown. View Workout Summary: Workout data summary has 3 pages. At the Top right corner of first page is the record number. Change the record number by pressing [S/S] or [L/R] button. The 2nd and 3rd lines are date and time of the record.
E. Workout Mode - Smart Lap E-06 Smart Lap is a concept of marking laps or waypoints automatically. You can make use of Smart Lap to achieve the following functions: Lap-By-Distance (LBD): Hold [M] to enter the Menu>Workout>SmartLap>ByDist When this function is turned ON, you can specify a fixed distance such that a new lap is marked automatically whenever the lap distance is reached with the preset target. You just focus on your workout. It is no need for you to push the lap button anymore.
E. Workout Mode - Application example - Backward tracking E-07 A typical application for this is backward tracking. If you are going to explore the wilderness without planning and want to return on the same path, you may: - Set LBD to, say 200 meters, and turn it ON: Hold [M] to enter Menu>Workout>SmartLap>ByDist>[ON, 200]. Remember that the maximum number of waypoints for a path is limited to 99. Set minimum LBD distance accordingly and yet it will not exceed the limit.
E. Workout Mode - Application example - Triathlon Race E-08 Tips for using the watch at Triathlon Race: 1) Start ( before start to swim): Secures the watch firmly around goggles straps, with watch antenna direction pointing to the sky.
E. Workout Mode - TrackLog interval 5 Nav Master records your track continuously. The sampling interval is specified by the value in the TrackLog setting. The Default is 4 seconds. It can be set from 1 second to 10 minutes.
F. Navigation Function F- 01 The Navigation mode has 2 screens: Navigation and Goto screens. Navigation screen gives you all the information you need when you are navigating to a waypoint. Goto screen allows you to pick a waypoint from the current path. Introduction Nav Master is able to keep 10 paths simultaneously. But you can work on a single path at a time. This is known as the current path. To select the current path: Menu > Navigation > SelPath. Each path has a maximum of 99 waypoints.
F. Navigation Function F-02 Backward mode The first waypoint is the destination. Select this mode when you want to navigate along the path in reverse order. For example: from the last waypoint to the first one along the current path. Pick the nearest waypoint on the Goto screen before you start. If the active waypoint is reached, it will navigate you to the previous waypoint along the path. This repeats until the destination (first waypoint) is reached.
F. Navigation Function - How to navigate GPS Fixed Fixing with GPS Hold [V] Current Speed Waypoint Destination Direction Workout Data View Navigation [V] Waypoint No. Path Name Navigation data Waypoint Data View F- 03 How to setup the path and navigation mode as described before. Turn ON GPS by Holding [V]. Or if you want to have workout logged, just press [S/S] to start workout. Then wait for GPS to be fixed.
F. Navigation Function Heading pointer Current Speed Waypoint Destination Workout Data View Navigation F- 04 Follow the heading pointer Once GPS has been fixed, the heading pointer starts to work. Make sure that the electronic compass has been calibrated properly (See compass calibration details in the System Setting chapter) and the watch is maintained at horizontal position. Tilting away from the horizontal position will affect the accuracy of the heading pointer.
F- 05 F. Navigation Function How to create Waypoints or a path in the PC Note: You should have GPS Master installed in the PC first. See the GPS Master installation and user’s manual for details. Navigation Run GPS Master Activate the Path Manager ( Path-->Path Manager) Click NEW on the Current Path Locate the desired position in the embedded Google Maps (GMAP) and left click the mouse button. A new waypoint is just created. It is assigned to a default name.
G-01 G. Compass Mode Function Direction Cardinal directions Azimuth N 0° horizontal angles 0° object D 315° N E object B point A SE object C Compass Directions point A of an Object of an object from a point can be terms of either cardinal direction or watch includes both cardinal direction The 16 cardinal directions Cardinal directions are the most commonly used forms of directions. They include North, South, East and West.
G- 02 G. Compass Function - Setting How to calibrate the compass Hold [M] under any mode to enter the main menu: Menu > Settings > System > Compass > Calibrate While calibrating, turn the watch 360 degree horizontally. You will see the trace of dots forming the outline of a rectangular box when the watch is rotating. Calibration is done when the outline is filled completely.
H- 01 H. Heart rate Monitor Function How to Use Heart rate Monitor (HRM) Working with the HRM is simple. Wear the chest strap as mentioned earlier. The strap should be turned ON by itself. At the watch, press [S/S] in Workout mode. The watch will display an icon “HR” with the chest strap in a couple of seconds. During your workout, the HR is stored at the rate as defined in the TrackLog. Press [S/S] again to stop when you finish workout.
H-02 H. Heart Rate(HR) Zone How to Use Target Heart Rate Zone % EMHR Health Fat Aerobics Burn User Above Zone Upper Limit 65% 75% 80% In Zone Lower Limit 50% 55% 65% User defined Setting target HR zone is very important for your personal training plan. If you are not working in the target zone, alert beeps will sound. You can adjust your pace of exercise to maintain your HR in the target zone limits. There are 4 target zone levels: Health, Fat Burn, Aerobics and User.
I. PC Connection Function Personal Computer I- 01 Install the bundled PC software into your PC in order to connect your watch for data transfer and making use of some special features. System requirements for the PC are as follows: Pentium II 300MHz or higher 64MB Main memory or higher 20MB hard disk space or more 256 color monitor or higher Window XP/VISTA/7 operating system CD-ROM drive USB port Follow the instructions in the GPS master setup wizard to install the program.
I- 02 I.
J- 01 J. Home Time Function Day of week Current time Month Date Home time mode How to set Time Of Day Nav Master is able to synchronize its clock with the satellite's atomic clock automatically. This is done whenever the GPS fixes its position. Auto time zone is another cool feature. It tries to set your current time zone according to the longitude. In other words, when there is a satellite and the GPS is turned on occasionally. The time is synchronized with the satellite’s clock.
J. Home Time Function J- 02 Time Zone Menu > Settings > TimeDate > HomeTime > TimeZone Set time zone according to your current location. It can be adjusted from +12:00 to -12:00 hours from GMT at 0.5 hour step. Alternatively , it can be set automatically by GPS. When this option is activated, GPS sets your time zone according to the longitude. It should work most of the time, but there are exceptions because of Daylight - Saving Time ( DST ) or other reasons.
K.
L- 01 L. Timer Function Timer time Current time Timer mode How to use the Timer iPress [ V ] in the Home time mode > Battery > Timer i Press [ S / S ] to start or stop . iPress [ L / R ] to reset to the preset time . iBeep sound will be heard in the last 10 seconds . iLong beep will be heard once reaching 0 : 00 : 00 ; press any key to stop the beep .
M - 01 M. Alarm Function Alarm No. Alarm time Alarm Day Alarm mode How to use the Alarm Press [V] in the Home time mode > Battery > Timer > Alarm Pres s [S/S] to select 1 - 5Alarms Press [L/R] to turn the alarm On/ Off How to set the Alarm Hold [M] under any mode to enter Menu > Settings > Alarms Alarm no.
N - 01 N. Dual Time Mode Dual Time Home Time Dual Time mode How to use Dual Time Press [ V ] in the Home time mode > Battery > Timer > Alarm > Dual Time How to set Dual Time Hold [M] under any mode to enter Menu > Settings > Time Date > Dual Time Press [ V ] to select Dual Time Press [ S / S ] or [ L / R ] to change the value at 30 min increment .
O- 01 O. User settings To get the accurate workout data, the user’s data setup is important. Hold [M] under any mode to enter Menu > Settings > User Gender or BirthDate or Weight Gender Press [S/S] or [L/R] to select Male or female Press [M] to confirm Date of Birth Press [S/S] or [L/R] to change the value Press [V] to confirm and set the following data Year > Month > Day Press [M] to confirm Weight Press [ S / S ] or [ L / R ] to change the value .
P- 01 P.
Q.
R- 01 R. Power Saving Mode Power Saving Mode This Watch has a Power Saving Function which can turn off the LCD display so that the battery can last longer. In the Power Saving Mode, the watch function is still working normally. (i.e. The timekeeping function is still running in the Power Saving Mode.) How to activate/exit the Power Saving Mode To activate the Power Saving Mode, hold the [L/R] button in the Home Time Mode for about 5 seconds and the LCD display will be turned off.
