User's Manual
Table Of Contents
[ESC]
[M][ESC]
'Sense'
Hold
[M]
Menu 5
change the setting
value faster
[S/S] / [L/R]
hold
[S/S] / [L/R]
change setting
value
Function Menu:
1 (less sensitive) to
7 (more sensitive)
[S/S] or [L/R]
Distance Mode
Current Heart Rate
Show current heart rate in beats per minute and percentage
of estiamted maximum heart rate.
Heart Rate Zone Alert
Alerts the user if the current heart rate falls above or below
the defined zone.
Calorie Expenditure
Calculation
Show the Calorie Expenditure which deduces from heart rate
and other sensors.
Heart Rate Statistics
Show the average, minimum and maximum heart rate.
Save/view Session
and Daily record
Logs the heart rate and other readings into a session, and
save them into a daily record. View the current session or
daily record.
Heart Rate Mode Function
In Zone Timer
Show the elapsed time for which the heart rate falls within the
defined Zone.
10.3.5 Distance Mode - Menu 5, Sense (Sensitivity Setting)
11.0 Heart Rate Mode: Heart Rate Functions 11.2 Heart Rate Mode: To get the Measurement
11.1 Heart Rate Mode: Wear Heart Rate Chest Strap on the Chest
radio
frequency
signal
heart
beat
signal
Watch
Heart Rate Captured
5 to 8
seconds
Sensor Activated
5
seconds
Heart rate
measurement
activated
Battery Door
Elastic band
Connector Contact Contact
Front
Back
2
3
1
5
4
1
!
Connect one connector
with the chest strap.
Ensure the connector is
completely lodged into
!
Extend the elastic band
for allowing a loose
fitting the chest strap on
the chest.
!
C o n n e c t t h e r e m a i n
connector with the chest
strap.
!
Fasten the elastic band
until it is fitted on your
!
Turn
comfortably.
the chest strap back to the front until the two contacts
are firmly contacted with the skin of your chest
IMPORTANT: DO NOT wearing the chest strap on your cloth, otherwise the chest strap CANNOT
get the heart rate signal.
NOTE: In dry seasons, wet the contacts with water to make the signal transmission normal.
[M] [L/R]
[S/S] [ESC]
[EL]
[M] [L/R]
[S/S] [ESC]
[EL]
[M] [L/R]
[S/S] [ESC]
[EL]
[M] [L/R]
[S/S] [ESC]
[EL]
NOTE:
(1) When enter Heart Rate Mode, the function (sensor) will be activated automatically after 5
seconds. Which can be activated manually too, see 9.0 for the detailed operations.
(2) When the function (sensor) is activated, the Watch will aggregate the readings of the
exercise into the current 'session'.
(3) The data of the current session can be saved into the 'Daily Record' (11.8.1) or reviewed
(11.8.2) by the Function Menu.
(4) The 'Daily Record' can be reviewed by the Function Menu too (11.8.3). The Watch can store
up to 10 daily records.
(5) See 9.1 to reset the current session. See 11.7 for the resolution if NO heart rate or long
response time.
NOTE: This setting adjusts the sensitivity of the Watch to well suit user's walking or running pattern, i.e
Select a higher sensitivity value, the Watch will be more sensitive to detect a motion.