Assembly Instructions

Page 4 of 5

Align the pre-drilled holes of the footrest assembly (#2) with

the bottom of the seat (#4). Insert 4 bolts (#A) through the

footrest assembly (#2) and secure those bolts using the

Allen wrench (#B) to lock them with the seat (#4).

#A x 4 pcs

Insert the base ring (#5) onto the top of the base (#3).

Then insert the gas lift cylinder (#1) into the base ring (#5).

Remove the protective plastic sleeve on the end of the gas

lift cylinder (#1).

Turn right (clockwise) to tighten