Assembly Installation Instructions

ManualsBrandsLatitude Run ManualsCeiling Lights1-Light Single Cylinder Pendant

MINI

MINI PENDANT

PENDANT

ASSEMBLY/INSTALLATION

ASSEMBLY/INSTALLATION INSTRUCTIONS

INSTRUCTIONS

P l e a s e r e a d c a r e f u l l y a n d s a v e t h e s e i n s t r u c t i o n s , a s y o u m a y n e e d t h e m a t a l a t e r d a t e .

CAUTION

Turn off the main power at the circuit breaker before installing the fixture, in order to prevent

possible shock

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualified electrician. Remove the fixture and the mounting package from the box and make sure that

no parts are missing by referencing the illustrations on the installation instructions.

ASSEMBLY

ASSEMBLY AND

AND

AND INSTALLATION

INSTALLATION

Turn off the power at fuse or circuit breaker

1. Gently take all parts out of the package, lay them on a smooth surface and unscrew the WIRE

NUT. Carefully pull the wires through the STEMS in to CANOPY. Thread ROD NIPPLE into

STEM. Attach as many of the STEMS as desired to make suitable height.

2. Attach the first STEMS to the SWIVEL located at bottom of CANOPY. Attach the last STEMS to

FIXTURE SOCKET ASSEMBLY and carefully pull excess wires through CANOPY.

3. Attach MOUNTING BAR to the OUTLET BOX using (2) MOUNTING SCREWS.

4. Make wire connections with WIRE NUTS:

A-Connect the black wire from the Fixture to the black supply wires.

B-Connect the white wire from the Fixture to the white supply wires.

C-Attach the fixture ground wire to the CROSS BAR with the GREEN GROUND SCREW.

Then connect it to the supply GROUND WIRE with the WIRE NUTS. Carefully tuck wires back

into the OUTLET BOX.

5. Attach the CANOPY over the OUTLET BOX and tighten the NUT on to the FIXTURE

SCREWS.

6. Locate the GLASS SHADE and SPACER pass over the SOCKET, Thread SOCKET RING onto

end of the SOCKET. Hand tighten until snug.

7. Install BULB S with TYPE A MAX. 60W wattage (not included).

Turn on the power at fuse or circuit breaker.

I F I N D O U B T A B O U T E L E C T R I C A

I F I N D O U B T A B O U T E L E C T R I C A L

L I N S T A L L A T I O N ,

I N S T A L L A T I O N ,

C O N S U L T A L I C E N S E D E L E C T R I C I A N .

OUTLET BOX

GROUND WIRE

WIRE NUT

MOUNTING BAR

FIXTURE SCREW

SUPPLY

WIRE

FIXTURE

WIRE

MOUNTING

SCREW

GREEN GROUND

SCREW

CANOPY

NUT

SWIVAL

NIPPLE

STEM

NIPPLE

STEM

NIPPLE

STEM

NIPPLE

SOCKET

GLASS

SHADE

SPACER

SOCKET

RING

BULB TYPE A

MAX.60(not

included)

MINI