Installation & Assembly

Attach Top Shelf Frame(E) between Front Panel(A) and Back Panel With Legs(B) using Washers(⑥)
and Bolts(⑤) with Allen Key(⑧) as pictured above
Note: The Wine Glass Rack(G) should be on the same side of the Front Panel(A).
Now in a sequential manner, proceed to tighten all Bolts at all joints.
Note: DO NOT fully tighten a BOLT in one go and then move on to the next. Rather, in a
sequential manner, gradually tighten each Bolt until all Bolts are evenly secured. This
methodology will ensure maximum evenness once all Bolts are fully tightened.
Step 6
Carefully place Glass(H) on the Top Shelf Frame(E) with pre-attached suction cups.
Step 7
8 OF 10