Caution :You must read this before you proceed CORNER SOFA Label Picture Description QTY A Chair Seat 1 B Long Backrest 1 B1 Short Backrest 1 C Back Cushion 2 1 of 9
D Leg 4 Description QTY ① Washer Rings 7 ② Allen key 1 ③ Bolt M8*20mm 2 ④ Spring Washer 2 ⑤ Flat Washer 2 ⑥ Connecting Piece 1 Label Picture Before Beginning Assembly: 2 of 9
Back Cushion(C) Back Cushion(C) Short Backrest(B1) Long Backrest(B) Chair Seat(A) Leg (D) Leg (D) Leg (D) FRONT FACING This CORNER SOFA has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the CORNER SOFA parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 C C A B B1 Position the Chair Seat(A) on its back,as shown. Unzip to open pouch and remove the 4 wooden legs and Back Cushion, close the pouch.
Install the Legs(D) into the bottom of the Chair Seat(A) by placing a Washer Ring(①) onto the threaded stem of the Legs. And then insert the threaded stem into the threaded mounting position at each Corner of the Bottom of the Chair Seat(A). Tighten by turning the Legs clockwise. Note: The use of Washer Ring(①) are OPTIONAL and are especially useful to help alleviate slight wobbles. Some Legs may need more than one Gasket whilst some Legs may not need any.
Align the mounting positions on the Chair Seat(A) and the Long Backrest(B) . Insert the Long Backrest (B) into the Chair Seat (A) as shown in above picture. Repeat the same step to install the Short Backrest(B1). Step 5 Back Cushion (C) Back Cushion (C) Chair Seat(A) Put the Back Cushion (C) on the CORNER SOFA. Step 6 Your CORNER SOFA is ready for use. Your CORNER SOFA can only be used on a flat, level surface.
If you already purchased 2 or more than 2 products, Please read on Step 1 ⑤ ③ ④ ② ⑥ Attach the Connecting Piece(⑥) to Chair Seat(A) using Bolts(③), Spring Washers(④), and Flat Washer (⑤) with Allen Key(②) as shown in the picture. Step 2 ⑥ ⑥ ⑥ ⑥ Connecting the two sofas by using the pre-fixed Connecting Piece (⑥) as shown in the picture.
Step 3 Step 3.1 Step 3.2 Step Step 3.4 Note: This is optional step in case we want to connect all sofas in a set together and to match the environment of your home.
of 9