Manualshelf

Installation & Assembly (Table)

ManualsBrandsLatitude Run Manuals3-4 Person Patio Conversation SetsGislaine Solid Wood 4 - Person Seating Group with Cushions
12345
Step 2
Step 3
Place the Table Top (A) with its underside skywards onto a clean, non-marring
surface.
Affix loosely the Leg (B) into the mounting position at the corner of the Table Top
(A) using the Bolts (①), Flat Washers (②) with Allen Key(③) as shown in picture
above.
Repeat the same process with the remaining three Legs(B).
Do not fully tighten the Bolts.
Place the Table onto a flat, level surface.
Then EXERT pressure, floorwards onto the Table with both hands.
This pressure will help the Table reach full alignment at all joints.
In a sequential manner, gradually tighten all Bolts at all joints until evenly secured.
Inspect the Table and make sure all parts are adequately connected.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
4 of 5