Installation & Assembly (Table)

Assembly Instructions

Caution: You must read this before you proceed

Table

Caution: This Table is NOT a TOY.

Keep your child/children at bay during the assembly process.

Whenever moving/lifting the Table and to prevent damage to the Table, two adults

are required to execute these actions.

1 of 5

Please look in the Table Top for hardware packs.

PAGE 1
Assembly Instructions Caution: You must read this before you proceed Please look in the Table Top for hardware packs. Table Caution: This Table is NOT a TOY. Keep your child/children at bay during the assembly process. Whenever moving/lifting the Table and to prevent damage to the Table, two adults are required to execute these actions.
PAGE 2
Part List Label Picture Description QTY A Table Top 1 B Leg 4 Description QTY Hardware Label Picture ① Bolt (M6x55mm) Flat Washer (M6x1.
PAGE 3
Assembly Steps Overview Leg (B) Table Top (A) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unplace and place all parts on a clean, non-marring surface.
PAGE 4
Step 2 Place the Table Top (A) with its underside skywards onto a clean, non-marring surface. Affix loosely the Leg (B) into the mounting position at the corner of the Table Top (A) using the Bolts (①), Flat Washers (②) with Allen Key(③) as shown in picture above. Repeat the same process with the remaining three Legs(B). Do not fully tighten the Bolts. Step 3 Place the Table onto a flat, level surface. Then EXERT pressure, floorwards onto the Table with both hands.
PAGE 5
of 5