Installation & Assembly (Ottoman)

Step 4
Place the Ottoman onto a flat, level surface.
Then EXERT pressure, floorwards onto the Ottoman with both hands.
This pressure will help the Ottoman reach full alignment at all joints.
In a sequential manner, gradually tighten all Bolts and Screws at all joints until evenly
secured.
Inspect the Ottoman and make sure all parts are adequately connected.
Adjust the Levellers until the Ottoman is level with the ground.
To adjust the Levellers, get assistance from an adult partner to lift/lean and
hold the Ottoman while you are working.
Step 5
Place Seat Cushion (F) onto Seat Panel (E), then tie the velcro straps around Seat
Panel (E) as pictured.
Your Ottoman is ready for use.
This Ottoman can only be used on a flat, level surface.
5 of 6